Non-Destructive Test Procedure For Hydraulic Cylinders


SET UP

Use care when handling cylinders. A hoist or other equipment must be used for heavier items.

1. Place cylinder on test stand.

2. Install correct fittings into ports.

3. Attach hoses to ports.

4. Set relief valve to operating pressure of cylinder.

STANDARD TEST

Make sure that the relief valve is set for the appropriate level. Fill cylinder with oil by alternately introducing oil into the extend and retract ports. Inspect all parts of the cylinder for leaks or damage.

5. Fully extend rod.

6. Check extend length to print.

7. Wipe rod.

8. Inspect rod for scratches or other damage.

9. Fully retract.

10. Check retracted length to print.

11. Pressurize retract/rod end port to relief pressure and hold.

12. Check for leaks around rod seal, head seal, port welds.

PISTON BYPASS INSPECTION

This test is to determine whether oil is leaking past the piston seals. Such a leak would allow the cylinder to drift while in operation.

13. Check for bypass over piston.

1. Disconnect hose from extend/base port (while retract/rod port is still pressurized). 2. Check for oil flow from extend/base port (should be none). 3. Reconnect hose to extend/base port.
14. Fully extend and pressurize extend/base port to relief pressure and hold.

15. Check for leaks around base and port welds.

16. Check for bypass over piston.

1. Disconnect hose from retract/rod end port. 2. Check for oil flow from retract/rod end port (should be none). 3. Reconnect hose to retract/rod end port.
COMPLETE TEST

Clean up and send to paint booth.

17. Fully retract with air pressure only.

18. Remove hoses and fittings.

19. Turn cylinder over to drain excess oil.

20. Plug ports.

21. Stamp with inspector number when complete and satisfactory.

22. Complete test report.



Article Source: http://EzineArticles.com/961751

8 Responses to "Non-Destructive Test Procedure For Hydraulic Cylinders"

  1. Thanks for sharing information..Depending on your requirements, DHF can supply high-quality hydraulic cylinders. DHF is the

    leading manufacturer of hydraulic cyclinder..Same dhf.in is a unique opportunity to Get industrial hydraulic cyclinders in India.

    It provides Hydraulic cyclinder AND Industrial hydraulic cyclinder in india

    ReplyDelete
    Replies
    1. Non-Destructive Test Procedure For Hydraulic Cylinders >>>>> Download Now

      >>>>> Download Full

      Non-Destructive Test Procedure For Hydraulic Cylinders >>>>> Download LINK

      >>>>> Download Now

      Non-Destructive Test Procedure For Hydraulic Cylinders >>>>> Download Full

      >>>>> Download LINK kT

      Delete
  2. Hydraulic Cylinder and Hydraulic Compact Power Pack are one of the prime products that are manufactured and supplied by Dynamic Hydrofab through out India. Now we have become one of the Top Hydraulic Cylinder Manufacturers in India. Visit Hydraulic Cylinders Manufacturers India or Hydraulic Compact Power Packs Manufacturers to know more about us. You can mail us at: dhf@dhf.in, dhfdelhi@gmail.com or you can call us at: +91-99100 00424.

    ReplyDelete
  3. A Hydraulic Cylinders from the #1 source of hydraulic components. Northern Tool offers pneumatic, agricultural, welded, tie rod + cross tube from a Leading Manufacturer & Supplier Of Tubes, Pipes And Hollow Sections.

    ReplyDelete
  4. A Hydraulic Cylinders from the #1 source of hydraulic components. Northern Tool offers pneumatic, agricultural, welded, tie rod + cross tube from a Leading Manufacturer & Supplier Of Tubes, Pipes And Hollow Sections.

    ReplyDelete
  5. Thanks for sharing this useful information and ideas with all of us. Keep sharing more information in the future. This really helps to us. Helical Rotary Actuator | Rotary Actuators Manufacturers

    ReplyDelete
  6. When you use a genuine service, you will be able to provide instructions, share materials and choose the formatting style. 2k moulding

    ReplyDelete